Merge pull request #3367 from prcutler/update-pytest-docs

Change all references of "py.test" to "pytest" in Pyramid documentation

4 files changed, 36 insertions, 36 deletions

diff --git a/docs/tutorials/wiki/installation.rst b/docs/tutorials/wiki/installation.rst
index 7f914267f..639aa0881 100644
--- a/docs/tutorials/wiki/installation.rst
+++ b/docs/tutorials/wiki/installation.rst
@@ -195,22 +195,22 @@ Run the tests
 
 After you've installed the project in development mode as well as the testing
 requirements, you may run the tests for the project. The following commands
-provide options to py.test that specify the module for which its tests shall be
-run, and to run py.test in quiet mode.
+provide options to ``pytest`` that specify the module for which its tests shall be
+run, and to run ``pytest`` in quiet mode.
 
 On Unix
 ^^^^^^^
 
 .. code-block:: bash
 
-    $VENV/bin/py.test -q
+    $VENV/bin/pytest -q
 
 On Windows
 ^^^^^^^^^^
 
 .. code-block:: doscon
 
-    %VENV%\Scripts\py.test -q
+    %VENV%\Scripts\pytest -q
 
 For a successful test run, you should see output that ends like this:
 
@@ -223,8 +223,8 @@ For a successful test run, you should see output that ends like this:
 Expose test coverage information
 --------------------------------
 
-You can run the ``py.test`` command to see test coverage information. This
-runs the tests in the same way that ``py.test`` does, but provides additional
+You can run the ``pytest`` command to see test coverage information. This
+runs the tests in the same way that ``pytest`` does, but provides additional
 :term:`coverage` information, exposing which lines of your project are covered by the
 tests.
 
@@ -236,14 +236,14 @@ On Unix
 
 .. code-block:: bash
 
-    $VENV/bin/py.test --cov --cov-report=term-missing
+    $VENV/bin/pytest --cov --cov-report=term-missing
 
 On Windows
 ^^^^^^^^^^
 
 .. code-block:: doscon
 
-    %VENV%\Scripts\py.test --cov --cov-report=term-missing
+    %VENV%\Scripts\pytest --cov --cov-report=term-missing
 
 If successful, you will see output something like this:
 
@@ -275,7 +275,7 @@ Our package doesn't quite have 100% test coverage.
 Test and coverage cookiecutter defaults
 ---------------------------------------
 
-Cookiecutters include configuration defaults for ``py.test`` and test coverage.
+Cookiecutters include configuration defaults for ``pytest`` and test coverage.
 These configuration files are ``pytest.ini`` and ``.coveragerc``, located at
 the root of your package. Without these defaults, we would need to specify the
 path to the module on which we want to run tests and coverage.
@@ -285,22 +285,22 @@ On Unix
 
 .. code-block:: bash
 
-    $VENV/bin/py.test --cov=tutorial tutorial/tests.py -q
+    $VENV/bin/pytest --cov=tutorial tutorial/tests.py -q
 
 On Windows
 ^^^^^^^^^^
 
 .. code-block:: doscon
 
-    %VENV%\Scripts\py.test --cov=tutorial tutorial\tests.py -q
+    %VENV%\Scripts\pytest --cov=tutorial tutorial\tests.py -q
 
-py.test follows :ref:`conventions for Python test discovery
+``pytest`` follows :ref:`conventions for Python test discovery
 <pytest:test discovery>`, and the configuration defaults from the cookiecutter
-tell ``py.test`` where to find the module on which we want to run tests and
+tell ``pytest`` where to find the module on which we want to run tests and
 coverage.
 
-.. seealso:: See py.test's documentation for :ref:`pytest:usage` or invoke
-   ``py.test -h`` to see its full set of options.
+.. seealso:: See ``pytest``'s documentation for :ref:`pytest:usage` or invoke
+   ``pytest -h`` to see its full set of options.
 
 
 .. _wiki-start-the-application:
diff --git a/docs/tutorials/wiki/tests.rst b/docs/tutorials/wiki/tests.rst
index c3a1ca79a..6c7f24645 100644
--- a/docs/tutorials/wiki/tests.rst
+++ b/docs/tutorials/wiki/tests.rst
@@ -51,22 +51,22 @@ follows:
 Running the tests
 =================
 
-We can run these tests by using ``py.test`` similarly to how we did in
+We can run these tests by using ``pytest`` similarly to how we did in
 :ref:`running_tests`. Courtesy of the cookiecutter, our testing dependencies have
-already been satisfied and ``py.test`` and coverage have already been
+already been satisfied and ``pytest`` and coverage have already been
 configured, so we can jump right to running tests.
 
 On Unix:
 
 .. code-block:: bash
 
-    $VENV/bin/py.test -q
+    $VENV/bin/pytest -q
 
 On Windows:
 
 .. code-block:: doscon
 
-    %VENV%\Scripts\py.test -q
+    %VENV%\Scripts\pytest -q
 
 The expected result should look like the following:
 
diff --git a/docs/tutorials/wiki2/installation.rst b/docs/tutorials/wiki2/installation.rst
index 5f2c6d44e..b2f1dde4a 100644
--- a/docs/tutorials/wiki2/installation.rst
+++ b/docs/tutorials/wiki2/installation.rst
@@ -342,22 +342,22 @@ Run the tests
 
 After you've installed the project in development mode as well as the testing
 requirements, you may run the tests for the project. The following commands
-provide options to py.test that specify the module for which its tests shall be
-run, and to run py.test in quiet mode.
+provide options to ``pytest`` that specify the module for which its tests shall be
+run, and to run ``pytest`` in quiet mode.
 
 On Unix
 ^^^^^^^
 
 .. code-block:: bash
 
-    $VENV/bin/py.test -q
+    $VENV/bin/pytest -q
 
 On Windows
 ^^^^^^^^^^
 
 .. code-block:: doscon
 
-    %VENV%\Scripts\py.test -q
+    %VENV%\Scripts\pytest -q
 
 For a successful test run, you should see output that ends like this:
 
@@ -370,8 +370,8 @@ For a successful test run, you should see output that ends like this:
 Expose test coverage information
 --------------------------------
 
-You can run the ``py.test`` command to see test coverage information. This
-runs the tests in the same way that ``py.test`` does, but provides additional
+You can run the ``pytest`` command to see test coverage information. This
+runs the tests in the same way that ``pytest`` does, but provides additional
 :term:`coverage` information, exposing which lines of your project are covered by the
 tests.
 
@@ -383,14 +383,14 @@ On Unix
 
 .. code-block:: bash
 
-    $VENV/bin/py.test --cov --cov-report=term-missing
+    $VENV/bin/pytest --cov --cov-report=term-missing
 
 On Windows
 ^^^^^^^^^^
 
 .. code-block:: doscon
 
-    c:\tutorial> %VENV%\Scripts\py.test --cov --cov-report=term-missing
+    c:\tutorial> %VENV%\Scripts\pytest --cov --cov-report=term-missing
 
 If successful, you will see output something like this:
 
@@ -429,7 +429,7 @@ Our package doesn't quite have 100% test coverage.
 Test and coverage cookiecutter defaults
 ---------------------------------------
 
-Cookiecutters include configuration defaults for ``py.test`` and test coverage.
+Cookiecutters include configuration defaults for ``pytest`` and test coverage.
 These configuration files are ``pytest.ini`` and ``.coveragerc``, located at
 the root of your package. Without these defaults, we would need to specify the
 path to the module on which we want to run tests and coverage.
@@ -439,22 +439,22 @@ On Unix
 
 .. code-block:: bash
 
-    $VENV/bin/py.test --cov=tutorial tutorial/tests.py -q
+    $VENV/bin/pytest --cov=tutorial tutorial/tests.py -q
 
 On Windows
 ^^^^^^^^^^
 
 .. code-block:: doscon
 
-    %VENV%\Scripts\py.test --cov=tutorial tutorial\tests.py -q
+    %VENV%\Scripts\pytest --cov=tutorial tutorial\tests.py -q
 
-py.test follows :ref:`conventions for Python test discovery
+pytest follows :ref:`conventions for Python test discovery
 <pytest:test discovery>`, and the configuration defaults from the cookiecutter
-tell ``py.test`` where to find the module on which we want to run tests and
+tell ``pytest`` where to find the module on which we want to run tests and
 coverage.
 
-.. seealso:: See py.test's documentation for :ref:`pytest:usage` or invoke
-   ``py.test -h`` to see its full set of options.
+.. seealso:: See ``pytest``'s documentation for :ref:`pytest:usage` or invoke
+   ``pytest -h`` to see its full set of options.
 
 
 .. _wiki2-start-the-application:
diff --git a/docs/tutorials/wiki2/tests.rst b/docs/tutorials/wiki2/tests.rst
index f3f89fe9c..fb33fc629 100644
--- a/docs/tutorials/wiki2/tests.rst
+++ b/docs/tutorials/wiki2/tests.rst
@@ -99,14 +99,14 @@ On Unix:
 .. code-block:: bash
 
     rm tutorial.sqlite
-    $VENV/bin/py.test -q
+    $VENV/bin/pytest -q
 
 On Windows:
 
 .. code-block:: doscon
 
     del tutorial.sqlite
-    %VENV%\Scripts\py.test -q
+    %VENV%\Scripts\pytest -q
 
 The expected result should look like the following: